If your Xiaomi device is not working properly or has become unresponsive, flashing the firmware can be a viable solution. Firmware is essentially the software that operates your device’s hardware. Sometimes the firmware can become corrupted, outdated, or malfunctioning, which can cause various issues on your device. In this article, we will guide you through the process of flashing Xiaomi firmware to revive your device.

Step 1: Download Xiaomi Firmware

The first step in flashing Xiaomi firmware(full link) is downloading the correct firmware package for your device. You can find the firmware files on the official Xiaomi website or the MIUI forums. Make sure to select the correct firmware version for your device model as flashing an incorrect firmware version could brick your device. Once downloaded, extract the firmware package to a folder on your computer.

Step 2: Install Xiaomi USB Driver

To flash the firmware on your Xiaomi device, you need to install the Xiaomi USB driver on your computer. The driver allows your computer to recognize and communicate with your device during the flashing process. You can download the USB driver from the official Xiaomi website or third-party websites.

Step 3: Enable USB Debugging

Before proceeding with the flashing process, you need to enable USB debugging on your Xiaomi device. To do this, go to Settings > About phone > Tap “MIUI version” seven times to enable Developer options > Go back to Settings > Additional settings > Developer options > Enable USB debugging.

Step 4: Boot Your Xiaomi Device Into Fastboot Mode

Once you have downloaded the firmware package, installed the USB driver, and enabled USB debugging, you need to boot your Xiaomi device into fastboot mode. To do this, turn off your device, then press and hold the Power button and Volume Down button simultaneously until the fastboot logo appears on your device’s screen.

Step 5: Connect Your Xiaomi Device to Computer

Connect your Xiaomi device to your computer using a USB cable. Make sure that the USB debugging is still enabled and that you have installed the correct USB driver for your device.

Step 6: Flash Xiaomi Firmware Using MiFlash Tool

Now it’s time to flash the firmware on your Xiaomi device using the MiFlash tool. The MiFlash tool is an official software developed by Xiaomi for flashing firmware on their devices. You can download the latest version of the MiFlash tool from the MIUI forums or third-party websites.

  1. Launch the MiFlash tool on your computer.
  2. Click the “Select” button, then navigate to the folder where you extracted the firmware package in Step 1 and select the firmware file.
  3. Make sure that the “clean all” option is selected in the bottom right corner of the MiFlash tool. This will erase all data on your device.
  4. Click the “Flash” button to start flashing the firmware on your Xiaomi device.
  5. Wait for the flashing process to complete. It may take a few minutes.
  6. Once the flashing process is complete, your Xiaomi device will automatically reboot.

Step 7: Set Up Your Xiaomi Device

After your Xiaomi device has rebooted, you need to set it up again as if it were a new device. Follow the on-screen instructions to configure your device settings, including Wi-Fi, Google account, and other preferences.

In Conclusion

Flashing Xiaomi firmware can revive your device if it’s not working properly or has become unresponsive. However, it’s important to follow the steps carefully and make sure that you have downloaded the correct firmware package for your device model. Also, keep in mind that the flashing process will erase all data on your device, so make sure to back up any important files before proceeding.